Call screening

Sometimes incoming calls need to be treated differently: calls from your boss or secretary should reach you on your cell phone, even during the weekend, while other calls can just go to voicemail. Calls from VIP clients in the evening hours should go straight to your cell phone since there is no point in ringing your IP phone when you are not in the office. Meanwhile, calls from your water supplier, who tends to call frequently during working hours for sales pitches, should go to voicemail so you can follow up on business matters at a convenient time.

All of this can be done using the call screening rules in PortaSwitch. When the call screening feature is enabled for an account (phone line), you can define a set of rules that will be applied to every incoming call. Each rule may include some of the following limitations:

• From – calling number condition. You can specify a list of phone numbers for a caller (ANI or CLI) which satisfy this condition, e.g., you can list extensions for your boss and secretary, your home phone, your wife’s cell phone number, and so on. When specifying a phone number, you can enter either the full number or a pattern (e.g., all numbers starting with 1800).
• To – called number condition. This can be useful if you have multiple account aliases (or DID numbers) forwarded to your main account. For instance, you may wish to treat incoming calls to your business toll-free number differently from calls to your regular phone number.
• Time Window – call time condition. You can specify limitations regarding the time of day, day of the week, day of the month, or some combination of these. This is ideal for making sure your phone will not ring in the middle of the night.

A rule may contain only some of these limitations (e.g., time), in which case the others will contain a wildcard (e.g., calls from any phone number, or made to any of your DID numbers).

Each rule provides instructions about exactly how a call should be processed. It contains a sequence of one or more of the following actions:

• Reject – simply drop the call without answering it.
• Ring – ring on the current IP phone.
• Forward – redirect to the numbers defined in the call forward/follow-me settings.
• Voicemail – connect the call to this phone’s voice mailbox.

When assigning an action to a rule, you will be offered a list containing all the possible combinations based on the currently available features for this account. For instance, the Forward option will be present only if the call forwarding service is currently enabled for the account.

When a new call arrives to PortaSwitch, call information is sequentially checked against all defined call screening rules. The call information (ANI, DNIS, and current time) is checked against each rule’s limitations. If at least one of these does not match, the rule is skipped and processing moves on to the next one. If there is a match for all three limitations, then the rule’s actions are executed and no further rules are processed. If none of the rules matches (or if no call processing rules have been defined), then the default rule is applied, as follows:

• Ring on the IP phone.
• If not answered within a certain time (defined by the Timeout parameter in Service Features for the Voice Calls service), and if the account has call forwarding enabled, attempt to connect the call to the phone numbers listed there.
• If the call is still not answered and the account has the UM service enabled, forward the call to voicemail; otherwise drop the call.

PBX users can use modes to control when and how calls come through to their line, and quickly change the way incoming calls are handled. For example, they can set their mode to accept calls during business hours, send all calls to voicemail at once during non-working hours, and forward calls to another colleague when on vacation. PBX users can change the mode for their extension by calling the IVR or on their self-care interface.

The PBX administrator can quickly change the way incoming calls are handled for all PBX extensions at once. Say the entire staff has to leave for a fire drill – the PBX administrator calls the IVR, and changes the mode from "Business hours" to "Emergency". Now, all incoming calls will be forwarded directly to mobile phones, and everyone who phones the office still receives assistance.

This is how it works:

Let’s say ABC company has three modes configured: "Business hours", "Non-working hours", and "Emergency". Each mode has a unique Dual-Tone Multi-Frequency (DTMF) code that is used for switching. Mary, a sales agent, goes out for business lunch (during business hours) and doesn’t want any calls to disturb her colleagues in the office. Thus, to forward all calls to voicemail at once, Mary dials *61 on her phone and specifies the DTMF code for "Non-working hours" mode. Once the mode is changed, Mary stops receiving calls, both from clients and other agents. All the calls are forwarded to voicemail. In two hours, Mary comes back to the office. She dials *61 on her phone again and changes the mode to business hours, meaning now she can receive calls.

• PBX users have more control over the incoming calls so that they can quickly change the modes to control what calls to accept.
• PBX administrators gain control over all incoming PBX calls. This allows for managing who can reach PBX users and at what time by quickly changing the way all incoming PBX calls are handled via IVR.

The policy contains a set of rules that define whether to play the response message (personalized audio message to play to callers before the call is answered) and what call action to apply (e.g., ring, forward, voicemail). A PBX customer may have several policies, e.g., a policy for each company department.

The PBX administrator can assign a policy to a specific account.

The order of rules matters. When the call arrives at PBX, PortaBilling checks the rules within the policy from top to bottom. The first rule that matches the call is applied, and the other rules are ignored. PortaBilling checks the rules with these parameters: caller/callee numbers (it can be a pattern, e.g., 2233%), period (time interval), mode of the called extension.

The Normal (Default) mode is present in the system. The DTMF code of the default mode is always zero (0). This DTMF code is used to switch to this mode. Users can switch from individual sticky mode to Normal (Default) mode to continue receiving calls according to the rules defined for the Normal (Default) mode.

The PBX administrator can set the following parameters for a mode:

• Dial DTMF to switch – this is a unique DTMF code of the mode. Users dial it to switch to this mode. Digits from 1 to 9 are available.
• Timeout, minutes – this is mode duration in minutes, after which the mode automatically switches to Normal (Default) mode. For example, there is a "Meeting" mode with 60 min timeout. If Mary switches to "Meeting" mode at 3 p.m, the mode switches to Normal (Default) mode at 4 p.m.
• Sticky mode for individual use – if the mode is marked sticky, only extensions can set this mode. If the PBX administrator switches all the extensions to the other mode, this change doesn’t influence the extensions with sticky mode. These extensions remain in this mode until they change it via IVR or their self-care interface, or sticky mode’s timeout ends.

Let’s say John Doe changes the mode from Normal (Default) to "Vacation" (all calls are forwarded to the other PBX extension) on their self-care interface. Later, the PBX administrator changes the mode for all PBX extensions to "Emergency" (calls are forwarded to the mobile phone). Despite this change, all incoming calls to John are handled according to vacation mode. Thus, when Mary calls John, the following happens:

• first, the call is forwarded to the extension of John’s colleague, Ann, (according to "Vacation" mode), and
• then the call is forwarded to Ann’s mobile phone (according to "Emergency" mode).

The PBX administrator can see all the modes and their configuration.

PBX users can record a personalized audio message to play to their callers before the call is answered, forwarded, or redirected to voicemail. This allows PBX users to give a caller additional information, for example, that the call is being recorded.

Let's say Mary Smith goes on vacation from August 1 and wants to record a personalized message to play when somebody calls her. Beforehand, the PBX administrator has to set several call processing modes: "Business hours", "Non-working hours" modes, and a "Vacation" mode for the users who go on vacation.

To switch from "Business hours" to "Vacation" mode, Mary dials *61 on her IP phone. Then she follows the voice-recorded instructions to record a personalized message: "I’m on vacation till August 5. Your call will be forwarded to my colleague, Ann". When John Doe, a client, calls Mary on August 3, he hears the message in full, and only then the call is forwarded to Ann’s phone. Ann picks up the call and talks to John. When Mary comes back to work on August 6, she calls the IVR (*61) again and dials a code that switches her phone line back to "Business hours" mode.

The message, added by the user, always overrides the default message added by the PBX administrator, no matter whether it is recorded via the IVR or uploaded via the self-care interface. The audio message can be in .wav, .mp3, .og, or .au format and don’t exceed the size of 3 MB.

To add the personalized message to a specific mode via self-care interface, the PBX users have to:

1. Upload an audio file to the self-care interface:
   • Go to the account self-care interface > Cloud PBX > Call screening > Response messages.
   • Click Browse, choose the file from PC, and click Upload. The name of the file automatically appears in the Description field.

   

2. Add an audio file to the mode:
   • Open Cloud PBX > Call screening > Modes.
   • Click Edit, select a specific mode from the drop-down menu, and afterward select the Temporary response message.

   

PBX administrators can also add a default message that applies to all PBX extensions, both via a customer self-care interface and by calling the IVR. Make sure that the PBX management feature is enabled for this extension. To do it, go to the PortaBilling interface, open the Account > Services > Service configuration > Voice calls > Incoming calls > Call screening, and enable the PBX manager toggle switch.

PortaBilling administrator can upload a default message on the PortaBilling web interface:

• For the customer: The administrator can upload a default message that will apply to all PBX extensions that have a specific mode, except those extensions that set their own personalized message. To add a default message, the administrator goes to the Response messages tab and uploads a file.The administrator can also choose how to store the response message file:
  • Permanent — the file is stored until the administrator deletes it;
  • Temporary — the file is stored for 1 day and automatically deleted afterward if not used.

  Afterward, to add the default message to the mode, the administrator goes to the Policies tab, adds a rule to the specific policy, selects the mode, and chooses the audio file in the Response message drop-down list.

  

• For a specific account: Personalized messages can be applied to each of the accounts separately. The administrator has to upload the file in the Response messages tab and afterward add it to the mode via the rule in the Rules tab. The file uploaded to the account Response messages list will appear on the account self-care portal.

Default service codes to change response messages:

• *62 - PBX management default code. When called, the response message for all accounts of a certain customer changes.
• *61 - individual management default code. When called, the response message for a single account changes.

You can change the default service codes by creating a new dialing rule for the customer.

PBX users can provide better service to their clients with informative audio messages.

Let's say ABC company wants to configure three modes for their PBX extensions:

• Business hours – to accept all calls from 9 a.m. till 6 p.m.
• Non-working hours – to forward calls to voicemail.
• Vacation – this is a sticky mode per individual use only. Users can enable it during vacation. All calls will be forwarded to the other PBX extension/phone number.

To configure the call handling for ABC company, the administrator performs the following steps:

1. Enable Call screening feature on the product:
   • Open Product > Services > Voice calls > Incoming calls.
   • Turn on the Call screening toggle switch.
   • Select the end users checkbox to enable users to edit call screening rules on their self-care interface.
2. Configure a policy to handle incoming calls:
   • Open Customer > Services > Call screening > Modes tab.
   • Click Add to create a new mode:
     • Business hours – select 1 as a DTMF code.
     • Non-working hours – select 2 as a DTMF code.
     • Vacation – select 9 as a DTMF code, select the Sticky checkbox so that only PBX users can use this mode.

     

     All the modes appear on the interface.

     

   • Go to Time filters tab, click Add to create a new filter:
     • Business hours – from 9:00 till 18:00 on Monday-Friday of every month.
     • Non-working hours – from 18:01 till 8:59 on Monday-Friday of every month and the whole day on Saturday-Sunday.
   • Go to Policies tab > Add Policy > Add rule.
   • Create three rules specifying a period, response message and actions such as ring, forward, voicemail, etc.
   • Rearrange the rules so that "Vacation" mode becomes the first rule.
3. Apply the policy to every account so that they can use the predefined modes:
   • Open Account > Services > Call screening.
   • Click Add rule and select a policy.

   By default, *61 is the prefix for changing mode for a specific extension and *62 for changing the mode for all PBX extensions at once (PBX manager option must be enabled for the account). It’s possible to change the default prefixes by creating a new dialing rule.