Search/add rate

Use the Rate search panel to find a specific rate (billing parameters for a specific destination).

Specify one or more of the search criteria and click Apply filters. Click Default filters to reset search criteria to their initial values (when you first opened the Rate search panel).

Choose to filter rates by prefix or number:

• Select Prefix to search for all available rates where the destination starts with the entered value.
• Select Number to search for the rate applicable to a specific phone number (the rate with the longest destination covered by the entered number).

Enter a prefix (a sequence of symbols). This field is only available if you select Prefix in the Search by field.

Enter a phone number. This field is only available if you select Number in the Search by field.

Filter rates by country.

• Select Any to search for all available rates.
• Select a particular country from the list to search for rates within this country.

Filter rates by the date they are effective at.

Click Search filter to choose one of the filtering options:

• Effective at and before – shows which rates are effective on the selected date and the rates that were effective before.
• Effective at – shows which rates are effective on the selected date.
• Effective at and after – shows which rates are effective on the selected date and the rates that will be effective in the future.

Specify the date and click OK.

Filter rates by status.

• Select Discontinued to search for deactivated rates.
• Select Forbidden to search for rates that are forbidden to call.
• Select Hidden to search for excessive rates. This status does not affect the billing engine's usage of the rate. It simply indicates that this rate may be omitted when making a list of rates for the end user.

Filter payback rates.

• Select Any to search for all available rates.
• Select Yes to only search for payback rates (credited).
• Select No to search for ordinary rates.

Filter rates by mobile country code. Specify a mobile country code here.

Filter rates by network. Specify a network code here.

Filter rates by a rate code (destination prefix). Specify a rate code or type a special destination (e.g., MSGN).

Filter rates by the destination group they belong to.

• Select Any to search for all available destination groups.
• Select a particular destination group from the list to search for rates within this destination group.

Use the Add rate panel to add new rates.

A rate is a combination of billing parameters for a specific destination.

You can manage rates both online and offline:

• Online rate managing is convenient for maintaining rate tables and for reference purposes.
• Offline rate managing is better in the case of new price lists or major updates.

To create a new rate online, fill in the rate information and click Save.

Select a destination prefix from the list. You can specify both a special destination (e.g., NETACCESS) and a phone number prefix (e.g., 420). Start typing a destination to find it faster and easier.

Select a rate code (destination prefix) from the list or type a special destination (e.g., MSGN).

Select a destination group from the list.

Select a mobile country code with its country.

Choose Custom to select one of the special destinations in the MNC/Network field (e.g., MSG).

Select a mobile network code.

Select a special destination:

• "|" matches any dialed number (unless more specific rate information is available). This wildcard destination ("pipe") is very useful for tariffs for internal purposes (e.g., for SIP-to-SIP on-net calls).
• VOICEONNET covers calls between IP phones connected to PortaSwitch (regardless of the actual phone number).
• VOICEONNETR covers on-net calls among accounts of subcustomers managed by the same reseller.
• VOICEONNETRX covers on-net calls among accounts of the same customer (on-net calls between extensions within the same PBX environment).
• INCOMING covers all incoming calls.
• INCOMINGN covers all incoming calls between IP phones connected to PortaSwitch.
• INCOMINGNR covers all incoming on-net calls among accounts of subcustomers managed by the same reseller.
• INCOMINGNRX covers all incoming on-net calls among accounts of the same customer (within the same PBX environment).
• UM applies for calls from IP phones to IVR access numbers (e.g., to check voice messages).
• EMERGENCY covers calls to emergency numbers (e.g., 911).
• UMIVR covers your customer’ calls to any IVR application (e.g., conferencing, callback calling, balance information).
• WiFi is used to charge your customers for WiFi sessions.
• NETACCESS is used to charge your customers for Internet access services.
• MSGN charges your customers for on-net messages exchanged by IM clients registered with PortaSwitch.
• CallRecording is used to charge your customers for the call recording service based on the duration of recorded calls.
• SpeechToText is used to charge your customers for the transcription service based on the duration of transcribed call recordings.

Select the off-peak period from the previously defined ones.

None means that a rate does not have an off-peak period.

Specify the first billing unit in seconds. The minimum unit is 1 second.

Specify the first billing unit for the off-peak period in seconds.

Specify the next billing unit in seconds, minimum 1 second.

Specify the next billing unit for an off-peak period in seconds.

Specify a per-minute price for the first interval.

Specify a per-minute price for the off-peak first interval.

Specify a per-minute price for the next interval.

Specify a per-minute price for the next off-peak interval.

Specify the exact date the rate becomes effective, then click OK.

Specify the exact time the rate becomes effective (e.g., 22:30). Consider the following time format – HH:MM, 24H. Select either the current date or a date in the future.

Here you can construct the actual call charge plan by defining a sequence of charge elements such as time intervals, surcharges and call disconnect which are to be applied to the call.

Click Formula wizard to define a rate formula.

This means that the customer is credited for using certain services, rather than paying for them (e.g., the service provider receives the termination fee for his own subscribers and wants to encourage his users to receive more calls by passing on a certain portion of these savings).

Volume discounts do not apply for transactions produced according to payback rates. The current discount has no effect on the credited amount. Thus, volume discount counters are not updated for such transactions.

Turn on the toggle switch to enable the payback status.

This means that the rate is excessive (e.g., there are usually more than 500 rates for Argentina mobile because of all the different prefixes). This doesn’t affect rate usage by the billing engine. It simply indicates that this rate may be omitted when making a list of rates for the end user.

Turn on the toggle switch to mark a rate as hidden.

This means that the rate will either immediately or from the specified time-stamped date stop being active. To deactivate the rate in the future, specify a certain date and time in the Effective From and Time fields.

Turn on the toggle switch to mark a rate as discontinued.

This means that the calls for this particular destination are forbidden and won’t be authorized.

Turn on the toggle switch to mark a rate as forbidden.

Group rates into categories such as “Premium,” “Cheap,” etc. Use these categories in routing plans (a combination of route categories in a specific order).

Select the Default route category to not assign a rate to any custom route category.

Group rates for calls made in off-peak periods into categories such as “Off-peak premium,” “Off-peak cheap,” etc. Use these categories in routing plans (a combination of route categories in a specific order).

Select the Default route category to not assign a rate to any custom off-peak route category.

Routing priority (0-10). Higher values mean a higher priority and these rates appear first in the routing list. A 0 value means do not use this rate for routing.

Routing priority during an off-peak period (0-10). Higher values mean a higher priority; a 0 means do not use this rate for routing.

This signals that all routes with a lower route category or preference will be ignored.

Turn on the toggle switch to enable the huntstop for this rate.

This signals that all routes with a lower route category or preference will be ignored during off-peak period.

Turn on the toggle switch to enable the off-peak huntstop for this rate.

Rounding is set in base units. The amount of consumed base units is then rounded up to a multiple of this number. For example, rounding is set to 1024 KB. A user consumes 1025 KB (which is the sum of amounts sent to PortaBilling in periodical credit-control requests during the Internet session). Thus, this 1025 KB is rounded up to 2048 KB (which is 2 MB in billing units).

Specify the price per billing unit, e.g., message or MB.

Specify the off-peak price per billing unit, e.g., message or MB.