Routing list

The Routing list panel displays the list of routes that matches your routing simulation parameters.

The routes on the Routing list panel are tried according to their position in the list. Refer to the Call routing chapter for more details.

Excluded  indicates that the route is excluded from the routing list due to huntstop.

Thumb down indicates that the adaptive routing criteria are currently applied to this route.

Each entry in the routing list consists of:

The sequential number that shows the route order. The routes from the top of the list will be tried first.

The translated called station ID (DNIS), as it will be sent to the vendor using this route.

The сall terminating vendor.

The name of the vendor connection. Click the connection name to open the connection details.

The node (or remote gateway IP) where the call will be routed.

The country the tested phone number or destination belongs to.

The destination description.

The name of the vendor tariff used to charge this call. Click the tariff name to open the tariff details.

The matching destination from the tariff.

Shows whether the adaptive routing penalty is applied to the route. To add/remove this column, click Settings on the title bar, click Customize columns, and select/clear the Penalty checkbox.

The next interval price for the specific destination (per minute).

Shows whether “Peak”, “Off-peak” or “Second off-peak” price is applied at the selected time. To add/remove this column, click Settings on the title bar, click Customize columns, and select/clear the Peak level checkbox.

The route category, e.g., “Premium,” “Cheap,” specified in the corresponding rate.

The routing priority specified in the corresponding rate.

The Check mark indicates that this route has huntstop enabled. This signals that the routes with a lower route category or preference will be ignored. See the Rate routing parameters chapter for more details on routing parameters.